(623) 933-4567

etchall® dip ‘n etch

etchall® dip ‘n etch is a re-usable etching liquid with the consistency of water. Use by “dipping” (submerging) glass objects to create an overall etched surface. Can be used with etchmask stencils and etchall® resist gel  to create beautiful designs. 

  • Use on: glass, mirror, ceramic, porcelain, marble, or slate.
  • Re-usable: Yes
  • Disposal: Will not harm plumbing. Flush with plenty of water.
  • Caution: Will etch porcelain sinks and tubs. Neutralize with water and baking soda before disposing in porcelain or ceramic sinks.

NOTE: Because dip ‘n etch requires submerging your project, the 4 oz size is for dipping jewelry and very small items only. To dip ‘n etch larger items, try the 16 oz or 32 oz bottles.

If you have questions about what size to order for the project you have in mind, email us at orders@etchall.com or call 623-933-4567.

Designer Tip Kit + 2 oz etchall creme

This kit includes:

The etchall® Designer Tip Kit and 2 oz- etchall® etching crème

etchall® Designer Tip Kit includes:

  • three tips (small, medium, large)
  • two empty 1 oz bottle
  • two caps and locks

The etchall® designer tips can be used with etchall® etching crème and etchall® resist gel.

Fill one of the bottles with either the etchall® resist or etchall® etching crème, attach an adapter cap, choose your tip and you are ready to go. Draw your design on the object to be etched in the same way you would draw a design on a cake with a tube full of icing. We recommend using only etchall® etching crème with our designer tips because of its uniquely smooth consistency which moves easily through the small tip openings while other etching creams contain particles that can cause obstructions.

 

etchall® etching crème is a re-usable crème that produces a white opaque, permanent etched finish on glass, mirror, ceramic, porcelain, marble and slate.

Rub’ n Buff Wax Finish

Avaiable in:

  • White
  • Gold Leaf
  • Silver Leaf
  • Patina

Rub ‘n buff is a wax base metallic finish that is formulated from imported carnauba waxes, fine metallic powders and select pigments. This unique blend gives etched pieces a finish that no paint can duplicate!

Instructions: After etching with etchall® etching creme, apply rub ‘n buff to etched surface with a soft cloth. After a few minutes, apply a second coat. Buff after 10 minutes with cloth, then remove

 

etchall® Glass Etching Bee-ginner Kit

New to etching? Or getting back into it? Grab everything you need to get started in one handy BEE-GINNER KIT!

INCLUDES:
(1) etchall® etching creme
(1) detail pick tool
(1) squeegee
(2) sheets transfer paper
(2) etchmask™ vinyl

etchall® etching crème

etchall® etching crème is a re-usable crème that produces a white opaque, permanent etched finish on glass, mirror, ceramic, porcelain, marble and slate. The creme is thick enough to etch designs with etchmask vinyl stencil – even on rounded and vertical surfaces! That’s right, you can even use etchall® on your doors and windows!

The Art and Craft Material Institute has approved etchall® etching creme to be used by children 12 years and older, children under 12 years can use etchall under the supervision of their parents. It conforms to ASTM-D4236.

  • Re-usable: Yes
  • Disposal: When disposing the crème, flush with plenty of water neutralized with baking soda. This way it will not harm the plumbing.
Cautionetchall® etching crème will etch porcelain or ceramic sinks.

Note that etchall® CREME is ideal for etching matte DESIGNS on a glass (or similar) surface. For an ALL-OVER etch, make sure to also try etchall® dip ‘n etch.

etchall® etchmask Stencil ComboPak

etchall® etchmask is a glossy adhesive vinyl used for creating stencils for use with etchall® etching crème and etchall® dip ‘n etch! The etchmask™ transfer sheets are a high-tack paper used to keep the pieces of the stencil together when applying to a surface. This special pack combines both!

Set includes:

  • (4) 9” x 15” etchmask™ (Self-adhesive vinyl sheets)
  • (5) 9” x 12” Transfer Sheets (Protects cut pieces during stencil transfer)

etchall® Squeegee

The etchall® squeegee is a flexible T-shaped plastic tool used to apply etchall etchmask or pre-cut adhesive stencils to glass or mirror.

Once the stencil is in place, the squeegee is perfect for removing air bubbles. ALSO use the etchall squeegee to apply and smooth etchall etching crème across the surface to be etched. The squeegee is ideal for scraping the etchall etching crème back into the jar for re-use.

etchall® Detail Pick Tool

The etchall® Detail Pick Tool is a metal instrument with a small thin needle tip used for removing small intricate and hard to reach areas of your stencil; especially helpful for stencil letters and works for larger areas as well.

etchall® etchmask

etchall® etchmask is a glossy adhesive vinyl used when creating stencils.

It adheres to glass surfaces preventing etchall etching crème or etchall dip ‘n etch to slide underneath. This gives sharp lines and a smooth finish to the design. When using etchmask to cut your own stencil designs, please see our instructions for etchmask. Etchmask vinyl is also compatible with all digital craft cutters such as Silhouette SD, Cameo, Cricut, etc.

Create your own etching stencils using etchall etchmask and etchall transfer sheet. Think of a stencil as a sandwich, two pieces of bread and cheese in the middle. The top bread is the transfer sheet, the cheese is the etchmask and the other bread is the glossy sheet that the etchmask sticks to.

etchall® etchmask available in 2 sizes:

9” x 15” (8 sheets)   $19.99

12” x 15” (6 sheets)   $19.99

etchall® etchmask transfer sheets

etchmask™ transfer sheets are a high-tack paper used to keep the pieces of the stencil together when applying to a surface. After cutting the design on etchmask with the digital cutter, place transfer sheet on top of etchmask. This allows for the cut pieces to stay together.

Create your own etching stencils using etchall etchmask and etchall transfer sheet. Think of a stencil as a sandwich, two pieces of bread and cheese in the middle. The top bread is the transfer sheet, the cheese is the etchmask and the other bread is the glossy sheet that the etchmask sticks to.

etchmask transfer sheets available in 1 size:

9” x 12” (10 sheets)  $19.99

etchall® Resist Gel

etchall® resist gel is a water-based gel that enables you to create your own unique designs without using a stencil.

etchall® resist gel forms a protective barrier against etchall® etching crème or etchall® dip ‘n etch. This barrier acts as a resist preventing the surface from being etched. etchall resist can be squeezed directly from the fine tip bottle, brushed evenly onto glass, or you can use the etchall designer pen tips. etchall resist gel appears opaque green when wet, but dries clear. Drying time depends on the thickness of application.

To draw a design, simply squeeze the etchall® resist onto a clean glass surface. This design, drawn with the etchall® resist gel, will be the un-etched portion of the glass; also known as the negative etch. Let the etchall resist gel dry completely and then apply etchall® etching crème as directed. Remove the etchall® etching crème according to the directions on the bottle, rinse under running water and peel the dry resist gel from the surface. Discard the used etchall® resist gel and rinse the object again.

etchall® resist gel can be squeezed directly from the fine tip bottle, brushed evenly onto the glass, or applied with etchall® designer tips. You can use etchall® resist gel on flat, curved or uneven surfaces. etchall® resist gel appears opaque green when wet but dries clear. Drying time depends on the thickness of application.

PRODUCT INFORMATION

May be used with:

  • etchall® etchmask
  • Rub on transfer stencils
  • Peel off stencils
  • Photo resist

Re-usable: NO

Disposal: Will not harm plumbing. Flush with plenty of water.

Goldoff®

Goldoff® has been used with ceramics since 1933 to remove purple stains from fired ceramics. Goldoff is perfect for removing fired gold, purple stains, fired lusters, mother of pearl, fired platinum, china paint, and fired palladium.

Simply pour a small amount onto a cloth and rub onto your fired ceramic piece as if you were polishing it. Wipe off and rinse with water.

Cautions: Do not let goldoff stay on the piece you are cleaning. Repeat if necessary. Do not use goldoff on glass.

Available Sizes: 2 fl. oz (580 ml)

Light My Bottle

Light your bottles without the hassle! This string of LED lights wraps around the black stem and fits easily into a standard empty wine bottle (or bottles of similar size). Simply press the button on top to turn the lights on and off.

Requires (3) AAA batteries, not included.

etchall® reposition/reuse stencil spray

Introducing the “etchall® reposition/reuse stencil spray”! Makes any stencil reusable for etching with etchall® etching creme. Simply Spray, Apply, and Etch! After etching, both your etchall® creme and stencil can be used to etch another day!

etchall® Designer Tip Kit

The etchall® Designer Tip Kit includes:

  • three tips (small, medium, large)
  • two empty 1 oz bottle
  • two caps and locks

The etchall® designer tips can be used with etchall® etching crème and etchall® resist gel.

Fill one of the bottles with either the etchall® resist or etchall® etching crème, attach an adapter cap, choose your tip and you are ready to go. Draw your design on the object to be etched in the same way you would draw a design on a cake with a tube full of icing. We recommend using only etchall® etching crème with our designer tips because of its uniquely smooth consistency which moves easily through the small tip openings while other etching creams contain particles that can cause obstructions.

etchall® Knife Combo

The etchall® knife combo contains:

  • stencil cut/pick knife
  • etchall swivel knife
  • 2 swivel knife replacement blades

All the great etchall® stencil tools combined in a plastic carrying case.

etchall® Stencil Cut/Pick Knife

The etchall® stencil cut/pick knife is used to remove a portion of the stencil in order to expose the surface to be etched. This process is known as picking or weeding because you selectively remove sections of the stencil.

This knife can also be used to cut a stencil or remove small areas left when using the swivel knife.

etchall® Swivel Knife & Replacement Blades

The etchall® swivel knife has a blade that rotates 360° allowing you to easily cut out stencils from etchall® etchmask or any self-adhesive paper or vinyl.

The etchall® swivel knife makes it easy to cut curves, circles, and round shapes within a stencil pattern. By using an etchall® swivel knife, you ensure that your stencil edges will be smooth and sharp. Hold the etchall® swivel knife vertically so that you only use the tip of the knife to cut out the design.

etchall® Tweezers

Etchall tweezers are ideal for use in conjunction with etchall stencil pick knife and etchall detail pick tool.

Use etchall tweezers to pull up small detailed pieces of a stencil or use to keep stencils down in intricate picking areas while pulling up fine details.